No, sorry you can not. The 2" receiver that comes with the Stealth Hitches item # SH27FRT can only be used for accessories like bike racks and cargo carriers. It's only been built to withstand the vertical force put it on by accessories.
You'll have to use the included ball mount to tow. There's no other options or any way to do any height adjustments with the hitch.
The Stealth Hitches item # SH27FRT has been confirmed to fit the 2021 Volvo XC90 Recharge. I have linked an installation... view full answer...
Hey Greg,
Gen-Y has you covered with the 1-7/8" hitch ball # 325-GH-090 which can bolt on to any of their 2-ball mounts, like the one included with the Phantom X Adjustable 2-ball mount # GY95XR. view full answer...
To secure the Trailer Valet MV PRO item # TV96FR hitch ball to your trailer's coupler you will want to remove ball from the valet itself and attach it to your trailer using the coupler lock. Then you will come in with the included wrench and tighten it all the way up so it is secure. Once you've completed these steps you'll lower it onto the Valet.
We demonstrated this using a different model Trailer Valet and I have linked the video below. It's the same process for the hitch ball so... view full answer...
Hi Russ, thanks for all of the details and photo!
For your application it will be best to get a whole new 14K Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37140ET. When I sent your photo over to my contact at Equal-i-zer he said there are a few things that are concerning like the shank is not one that came with the hitch head and there is some hardware missing like the sleeves where the bars install on the hitch system.
Getting a whole new system gives you a whole... view full answer...
Thanks for the pictures! No, I am sorry Richard you can not. The B&W Continuum item # BW78FR only works with frames that are 5" and 6" tall. Instead, I recommend using the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control item # EQ37100ET.
The Equal-i-zer item # EQ37100ET has a tongue weight range of 600 lbs - 1,000 lbs so it would be perfect for your car trailer. This system has built in 4-point sway control that will keep your trailer in line with your truck when you make... view full answer...
Hi David,
The Saris Door County Bike Rack for 2 Electric Bikes # SAR42RR does require a 2" trailer hitch receiver tube opening in order to mount. Hitch pin holes for a 2" hitch are typically 5/8" in diameter. The anti-rattle hitch pin lock # SA3022 included with this rack has a 7/16" thickness and threads into the shank of the rack to clamp it to the receiver tube and prevent any movement/rattling. As long as you have a 2" trailer hitch receiver you'll be able to use the Saris Doo County... view full answer...
Due to having the cutaway chassis on your 2011 Chevrolet Express 3500 you are going to want to look at either the Draw-Tite Receiver # 41990-07 with 7" mounting brackets or the # 41990-16 with 16" tall mounting brackets. The height of the brackets will depend on the height of your frame from where you would like the receiver to sit. These can be bolted on but welding is the preferred method.
You will want to check your wiring to see if it included the round connector for a 7-Way # 30955... view full answer...
Well Brent that is certainly a valid concern, because the Dexter DX7.5L A-60 Brake Actuator # DX29FR does not have any kind of built in safety cable connections. In fact very few of the surge brake actuators that we carry will have cable connections. In most cases the safety cable connection will be part of the trailer tongue itself and not part of the brake actuator (example pictured below).
As far as getting you a cable connection point, it could be as simple as putting a hole a bit... view full answer...
Go To Results